News
Installation method of hydraulic gear pump
Views: 1770 Update Date: Aug 26 , 2017
Hydraulic gear pump installation, base or bracket should have sufficient stiffness, the hydraulic gear pump in the twisting force generated by the rotation of the shaft, and should not be subjected to other force; coupling between different axes is not greater than 0.05mm; hydraulic gear pump should be according to the direction of rotation of the calibration operation. Pay attention to the oil outlet position, large hole inlet.
The hydraulic system must set the safety valve, the same is slim, the tank must be to prevent dust, sand and other debris into the oil and regular cleaning, oil pipeline as short as possible, not more than 500mm, should minimize the use of elbow, the piping shall not leak phenomenon.
